In short
Moving a biosafety cabinet can disturb HEPA filter seals and airflow, so common standards require recertification before use. Testing is the lab's responsibility: book a certifier for the days after placement and keep the cabinet out of use until then.
Why it is required
A BSC protects the worker, the sample and the environment with precise airflow and HEPA filters. Vibration during transport can shift a filter or break a seal without any visible sign, so it is tested after every move.
What is usually tested
- HEPA filter integrity.
- Airflow velocity and direction.
- Alarms and fan operation.
- Exhaust connection, if any.
Avoid delays
- Book the certifier when you set the moving date.
- Make sure the cabinet is placed and connected before the certifier arrives.
- No certifier yet? We are happy to give you the phone number of a qualified one we know.
- If you have several cabinets, move them in phases.
More about moving fume hoods
- A chemical fume hood after a move: why it needs testing and who does itBefore work resumes in a chemical fume hood that was moved, a qualified tester on the lab's behalf checks it: face velocity, a smoke test and the airflow alarm. Why this is needed after a move, what is checked, and how to schedule the test with the move.
- How to move a chemical fume hood safelyHow to move a fume hood: decontaminate, disconnect exhaust and gas, measure the route, move it upright and test airflow after reinstallation.
More guides
- How to move a chemical fume hood safelyHow to move a fume hood: decontaminate, disconnect exhaust and gas, measure the route, move it upright and test airflow after reinstallation.
- Moving a laminar flow cabinetHow to move a laminar flow cabinet (clean bench): protecting the HEPA filter, removing the stand, upright shock-free transport, and airflow and filter integrity testing before work resumes. Plus how it differs from a biosafety cabinet.
- A chemical fume hood after a move: why it needs testing and who does itBefore work resumes in a chemical fume hood that was moved, a qualified tester on the lab's behalf checks it: face velocity, a smoke test and the airflow alarm. Why this is needed after a move, what is checked, and how to schedule the test with the move.
Need help with this?
We do fume hood moving from start to finish. Request a quote.