What we move
- Electrical and network cabinets
- Heavy safes
- Optical tables
- Fume hoods and −80 °C freezers
- Autoclaves
- Single heavy items
We do not move industrial machines or CNC machines.
Our process
- 01Technical check
Weight, dimensions, lifting points and manufacturer instructions. We check the route, openings and floor load.
- 02Preparation
Doors and drawers closed and locked, protruding parts removed where needed, and surfaces and glass protected.
- 03Lifting and loading
Heavy-duty skates, forklift or crane, and tie-down to anchor points on the truck.
- 04Placement
Precise placement at the new site, ready for levelling and connection by the customer's electrician or technician.
Electrical cabinets
Electrical and network cabinets are heavy and not always balanced. Before the move the customer's electrician disconnects them. We lift them only from the designated lifting points, move them upright with full tie-down and place them at the new site, where the electrician reconnects them.
Heavy safes
A heavy safe is moved after three checks: its weight, the route (stairs, elevator and openings) and the floor load at the destination. Medium safes go down stairs with dedicated equipment. When the elevator cannot take the weight or the stairs are narrow, the safe is lifted by crane through a window or balcony. See Moving a heavy safe: when you need a crane.
Optical tables
An optical table top is very heavy, sometimes over a tonne, with concentrated weight. Before the move all components come off the top, the isolators are locked and the top is separated from its legs. It travels on heavy dollies, or by crane when there is no elevator access, and at the new site it is placed, levelled and the isolation is switched back on. See Moving an optical table without losing level.
Moving heavy equipment inside the building
Not every move goes on the road. Often an electrical cabinet, a safe or an optical table needs to go to another room or another floor. Internal moves also start with weight, route and floor load, and use heavy-duty skates, a forklift or transport dollies so the equipment reaches its new spot without damage to it, the floor or the walls. When there is no ground access we bring a crane; see Lifting equipment by crane: when you need it and how to plan.
What heavy equipment moving includes
| Technical check: weight, dimensions and lifting points | Included |
|---|---|
| Route, openings and floor load check | Included |
| Heavy-duty skates, transport dollies and forklift | Included |
| Tie-down with ratchet straps to anchor points | Included |
| Load-spreading boards to protect the floor | As needed |
| Crane and crane truck | As needed |
| Power disconnection and connection, levelling and calibration | Customer's electrician or technician |
What to send for a quote
- Equipment type and manufacturer, and the model if possible.
- Weight and dimensions, from the rating plate or the catalogue.
- Photos of the equipment and of the way out: doors, steps and ramps.
- Pickup address, destination and preferred date.
Common questions about heavy equipment moving
What is the maximum weight you move?
It depends on the lifting equipment and the route. For very heavy items we coordinate a crane and a suitable truck. Send us the equipment details and we will check.
Do you move a single heavy item?
Yes. We also move a single heavy item, such as a safe or an electrical cabinet.
Is a crane needed?
Not always. Often heavy skates and a forklift are enough. When there is no access, we bring a crane.
How do you protect the floor?
With load-spreading boards and wheels that do not damage the floor, especially epoxy floors.