In short
To move a fume hood safely, empty and clean it, have a contractor disconnect exhaust, gas and power, measure the entire route, separate the hood from its base and move it upright. After placement, reconnect and test airflow.
Prepare
- Remove all chemicals and glassware.
- Clean the work surface and interior, and document that it is clean.
- Have the HVAC contractor disconnect the exhaust duct and qualified trades disconnect gas, water and power.
Measure the route
A fume hood is long, heavy and top-heavy. Measure doors, corridors, turns and the elevator, and check the elevator load rating. If it will not fit, plan a crane lift through a window or balcony before moving day.
Move and reinstall
- Separate the hood from the base cabinet.
- Secure the sliding sash and protect the front.
- Transport upright with full tie-down.
- Reinstall, level, reconnect exhaust and test face velocity.
More about moving hoods and cabinets
- A chemical fume hood after a move: why it needs testing and who does itBefore work resumes in a chemical fume hood that was moved, a qualified tester on the lab's behalf checks it: face velocity, a smoke test and the airflow alarm. Why this is needed after a move, what is checked, and how to schedule the test with the move.
- Moving a laminar flow cabinetHow to move a laminar flow cabinet (clean bench): protecting the HEPA filter, removing the stand, upright shock-free transport, and airflow and filter integrity testing before work resumes. Plus how it differs from a biosafety cabinet.
- Biosafety cabinets after a move: why recertification is neededWhy a biosafety cabinet (BSC) needs recertification after it is moved, what is tested, and how the lab can plan the test to avoid delays.
More guides
- Biosafety cabinets after a move: why recertification is neededWhy a biosafety cabinet (BSC) needs recertification after it is moved, what is tested, and how the lab can plan the test to avoid delays.
- Moving a laminar flow cabinetHow to move a laminar flow cabinet (clean bench): protecting the HEPA filter, removing the stand, upright shock-free transport, and airflow and filter integrity testing before work resumes. Plus how it differs from a biosafety cabinet.
- A chemical fume hood after a move: why it needs testing and who does itBefore work resumes in a chemical fume hood that was moved, a qualified tester on the lab's behalf checks it: face velocity, a smoke test and the airflow alarm. Why this is needed after a move, what is checked, and how to schedule the test with the move.
Need help with this?
We do fume hood moving from start to finish. Request a quote.